The Cone Type Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam or gas media in rugged conditions where accuracy, low maintenance and cost are important. With its DP built-in flow conditioning design, the cone type flowmeter is especially useful in tight-fit and retrofit installations in which the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are either impractical or unavailable.
The V-shaped cone type flowmeter is designed for today’s most industry which are oil /gas production, chemical, food, beverage, plastics, textile, power and water & wastewater applications.
The cone type flowmeter SCM) is a better solution: see why. It combines exceptional performance, low maintenance and long life for superior value.
|Design/Calculation||PED 97/23/EC, ANSI/ASME, RW Miller|
|Other mechanical jount as required|
|Line size||1/2″ through 120″|
|special size is available on request|
|Pressure taps||1/2″ , 3/4″ Threaded or Socket|
|β-ratio range||0.4 to 0.75 as standard|
|special beta s are available|
|Accuracy||±0.5%(calibrated) across a 10 : 1 turndown|
|±3% to ±4%(uncalibrated)|
|Rangeability||Greater than 10 : 1(typical 15 : 1)|
|Head loss||approx. 20% of generated diff. pressure|
|Element mat’l||Min. 304SS|
|Striaght length||Upstream : Min. 3D|
|Downstream : Min. 1D|
- Manifold valve
- Full assembly with DP transmitter